This is a rare original factory print showing various profiles and dimensions of the car. The 1/10th scale drawing is dated ‘4-9-57’ and stamped in red on the front and rear by Mercedes with the Tri-star logo. It measures 16 x 5.5″” / 40 x 13.5cm and is in very fine condition with minor handling wear.

• This is of course accompanied by our lifetime certificate.

The post 1957 Mercedes 300SL Roadster blueprint appeared first on Collector Studio - Fine Automotive Memorabilia.

This is a rare set of five original factory heliographic prints of technical drawings / sketches of the earliest Lamborghini Countach ‘LP 500’ showing various profiles of the car. The scale drawings were done for Bertone in period – at the same time these additional copies were executed for the factory.

The vintage prints are all in very fine condition, and the full set includes;

1. Overhead with doors open, 21.5×18″ / 55x45cm
2. Front view, 18x 13″ / 45x33cm
3. Rear view, 18x 13″ / 45x33cm
4. Side profile cut away with engine, 35×23″/ 89x59cm
5. Side profile ‘skeleton’ with engine, 35.5×20″ / 90x50cm

• This awesome piece of supercar history is of course offered with our lifetime certificate, as well as a second letter from an ex- Bertone employee who received them.

The post 1971 Lamborghini Countach Bertone factory blueprint collection appeared first on Collector Studio - Fine Automotive Memorabilia.

This is a rare original factory technical drawing of the Tipo 33/2 Daytona Coupe ‘Long Tail’ (lungo) showing various profiles and dimensions of the car. The 1/4th scale drawing is dated and stamped October (Ott) 1968 and is quite large, measuring nearly 4.5 feet wide  (52 x 29.5″” / 132   x 75 cm) and is in very fine condition with fold lines. There is also a second portion, with separate angles, measuring 36 x 29.5″ /  91x75cm. This second piece is independent and can be displayed separately. (ALN24)

• This is of course accompanied by our lifetime certificate.

The post 1968 Alfa Romeo Tipo 33/2 Daytona Coupe blueprint appeared first on Collector Studio - Fine Automotive Memorabilia.

This rare original technical print features a side profile of the supercar with various measurements of the wheel arches and front and rear clip heights.  It measures 21.5 x 13.5″ / 55 x 34 cm and is in fine condition but with minor handling wear from age.

• This is of course offered with our lifetime certificate.   (CSF4) (CSM25)

The post 1987 Ferrari F40 blueprint – Wheel Detail appeared first on Collector Studio - Fine Automotive Memorabilia.

This rare large format original factory technical print features four profiles of the supercar. It measures 31.5 x 21.5″ / 80 x 54 cm and is in fine condition but with minor handling wear from age.

In the top left corner agenda, it is dated ’24-7-87′ (just three days after the car was launched on July 21, 1987) and detailed ‘Autovettura carrozzata’ as well as ‘Tipo F120 AB’ (the internal chassis designation).

• This is of course offered with our lifetime certificate. (CSF4) (CSM25) (x1xx)

The post 1987 Ferrari F40 factory blueprint – Launch appeared first on Collector Studio - Fine Automotive Memorabilia.

This rare original technical print features several profiles of the supercar and is dated ‘21.8.87’.  To the legend it states ‘Parafangi secondo dir. / Tipo F120 AB / No. 136388’, indicating that it was a factory drawing pertaining to the fender design. It measures a large 33.5 x 23.5″ / 85 x 60 cm and is in fine condition but with minor handling wear from age.

• This is of course offered with our lifetime certificate.  (CSF4)(CSM25)

The post 1987 Ferrari F40 factory blueprint – Fenders appeared first on Collector Studio - Fine Automotive Memorabilia.

This is a rare original factory heliographic print of a technical drawing of the Fiat 131 Abarth showing front and side profiles of the car. The 1/10th scale drawing was done for Bertone in period (dated April 1979) – at the same time these additional copies were executed for the factory.

The large vintage print measures 35.5×15.5″ / 90x39cm and is in very fine condition.

• It is of course offered with our lifetime certificate. (BCP) (x1xx)

The post 1979 Fiat 131 Abarth Bertone factory blueprint appeared first on Collector Studio - Fine Automotive Memorabilia.

This is a rare original factory heliographic print of a technical drawing of the Fiat 136 coupe showing side profiles of the car. The 1/10th scale drawing was done for Bertone in period (dated Nov/1974) – at the same time these additional copies were executed for the factory.

The vintage print measures 26×17.5″ / 66x44cm and is in very fine condition.

• It is of course offered with our lifetime certificate. (BCP) (x2xx)

The post 1974 Fiat 136 Coupe Bertone factory blueprint appeared first on Collector Studio - Fine Automotive Memorabilia.

This is a rare original factory heliographic print of a technical drawing of the Navajo showing various profiles of the concept car that was shown at the Geneva Salon. The 1/10th scale drawing was done for Bertone in period (dated Mar / 1976) – at the same time these additional copies were executed for the factory.

The vintage print is quite large (33.5×15.5″ / 85x39cm) and is in very fine condition.

• It is of course offered with our lifetime certificate. (BCP) (x4xx)

The post 1976 Alfa Romeo 33 Navajo Bertone factory blueprint appeared first on Collector Studio - Fine Automotive Memorabilia.

This is a rare original factory heliographic print of a line drawing of the Lamborghini Espada showing various profiles of the car. The drawing was done for Bertone in period – at the same time these additional copies were executed for the factory.

The vintage print is quite large (27×17.5″ / 69x44cm) and is in very fine condition.

• It is of course offered with our lifetime certificate. (BCP) (x1xx)

The post 1968 Lamborghini Espada Bertone factory blueprint appeared first on Collector Studio - Fine Automotive Memorabilia.

This is a rare original factory heliographic print of a technical drawing of the Lamborghini Marzal showing various profiles of the car. The 1/10th scale drawing was done for Bertone in period – at the same time these additional copies were executed for the factory.

The vintage print is quite large, about 4 feet wide  (49×18″ / 125x45cm) and is in very fine condition.

The Marzal was a one-off, but the general shape and many of the ideas were used in the Lamborghini Espada. Prince Rainier III drove the car in a parade lap at the 1967 Monaco GP.

• This piece of concept supercar history is of course offered with our lifetime certificate. (BCP) (x5xx)

The post 1967 Lamborghini Marzal Bertone factory blueprint appeared first on Collector Studio - Fine Automotive Memorabilia.

This is a rare original factory heliographic print of a technical drawing of the Lancia Stratos showing various profiles of the car. The original 1/10th scale drawing was done for Bertone in period – at the same time these additional copies were executed for the factory.

The vintage print is quite large, about 4 feet wide  (49×18″ / 125x45cm) and is in very fine condition.

• It is of course offered with our lifetime certificate. (BCP) (x3xx)

The post 1971 Lancia Stratos Bertone factory blueprint appeared first on Collector Studio - Fine Automotive Memorabilia.

This is a rare original factory heliographic print of a technical drawing of the Lamborghini Miura P400 showing various profiles of the car. The 1/10th scale drawing was done for Bertone in period – at the same time these additional copies were executed for the factory.

The vintage print is quite large, about 4 feet wide  (49×18″ / 125x45cm) and is in very fine condition.

• This piece of supercar history is of course offered with our lifetime certificate. (BCP) (x4xx)

The post 1966 Lamborghini Miura Bertone factory blueprint appeared first on Collector Studio - Fine Automotive Memorabilia.

This is a rare original factory heliographic print of a technical drawing of the Giulietta Sprint showing various profiles of the car. The 1/10th scale drawing was done for Bertone in period – at the same time these additional copies were executed for the factory.

The vintage print is quite large, about 4 feet wide  (49×18″ / 125x45cm) and is in very fine condition.

• It is of course offered with our lifetime certificate. (BCP) (x4xx)

The post 1954 Alfa Romeo Giulietta Sprint Bertone factory blueprint appeared first on Collector Studio - Fine Automotive Memorabilia.

This is a rare original factory heliographic print of a technical drawing of the Fiat Dino showing various profiles of the car. The 1/10th scale drawing was done for Bertone in period – at the same time these additional copies were executed for the factory.

The vintage print is quite large, about 4 feet wide  (49×18″ / 125x45cm) and is in very fine condition.

• It is of course offered with our lifetime certificate. (BCP) (x3xx)

The post 1966 Fiat Dino Bertone factory blueprint appeared first on Collector Studio - Fine Automotive Memorabilia.

This is a rare original factory heliographic print of a technical drawing of the NSU RO Trapeze showing various profiles of the car. The 1/10th scale drawing was done for Bertone in period – at the same time these additional copies were executed for the factory.

The vintage print is quite large, about 4 feet wide  (49×18″ / 125x45cm) and is in very fine condition.

• It is of course offered with our lifetime certificate. (BCP) (x4xx)

The post 1973 NSU RO 80 Trapeze Bertone factory blueprint appeared first on Collector Studio - Fine Automotive Memorabilia.

This is a rare original factory heliographic print of a technical drawing of the earliest Lamborghini Countach showing various profiles of the car. The 1/10th scale drawing was done for Bertone in period – at the same time these additional copies were executed for the factory.

The vintage print is quite large, about 4 feet wide  (49×18″ / 125x45cm) and is in very fine condition.

• This awesome piece of supercar history is of course offered with our lifetime certificate. (BCP) (OOS)

The post 1971 Lamborghini Countach Bertone factory blueprint appeared first on Collector Studio - Fine Automotive Memorabilia.

This is a rare original factory heliographic print of a technical drawing of the Lamborghini Bravo showing various profiles of the car. The 1/10th scale drawing was done for Bertone in period – at the same time these additional copies were executed for the factory.

The vintage print is quite large, about 4 feet wide  (49×18″ / 125x45cm) and is in very fine condition.

The Bravo was designed to showcase ideas for a replacement to the Urraco. It was never put into production, but many styling features were inspired by the Countach, including the angular features and the window.

• This piece of concept supercar history is of course offered with our lifetime certificate. (BCP) (x3xx)

The post 1976 Lamborghini Bravo Bertone factory blueprint appeared first on Collector Studio - Fine Automotive Memorabilia.

This is a rare original factory heliographic print of a technical drawing of the Giulia Sprint GTC Cabriolet  showing various profiles of the car. The original 1/10th scale drawing was done by Luigi Fusi and is dated ’26-11-64′.

The print is quite large, nearly 3 feet wide  (23×32″ / 58x81cm) and is in very fine condition. (x3xx) (M24)

• It is of course offered with our lifetime certificate.

The post 1964 Alfa Romeo Giulia GTC blueprint appeared first on Collector Studio - Fine Automotive Memorabilia.

This is a rare original factory heliographic print of the master technical drawing of the Tipo 33 Stradale showing various profiles of the car. The original 1/10th scale drawing was executed on ’29-9-69′ by Luigi Fusi. The clear yellowish acetate drawing is quite large, nearly 3 feet wide (33.5×23.5″ / 85x60cm) and is in very fine condition.

With only 18 real Stradales built you know how rare this is. What a fantastic piece from one of the most iconic Alfas!  (x2xx)

• It is of course accompanied by our lifetime certificate.

The post 1967 Alfa Romeo Tipo 33 Stradale blueprint appeared first on Collector Studio - Fine Automotive Memorabilia.